1.5 oz ceramic shot glass with sublimation coating. They are Orca brand have a glossy finish for vibrant images.
Template will be included with purchase. It will overlap a bit at the seam so that you can get a good fit.
This is for blank shot glasses. The printed picture is for example only of ones I have done with these same glasses.
PRESSING INSTRUCTIONS and RECOMMENDATIONS - (these are only recommendations as each press and oven are different. You will need to see what will work best for your particular set up)
For an air fryer (1200 W) or oven:
Set your oven temperature to 370 degrees. Heat for 9 to 10 minutes, let cool completely before taking the paper off.
For a VARIABLE temperature mug press:
Set the “idle” temperature to 320 degrees, the “print” temperature to 340 degrees and the timer for 60 seconds. Adjust the pressure to medium, but be careful, too much pressure can crack or break the mug.
For a CONSTANT temperature mug press:
Set the temperature of the press to 400 degrees F time to about 4-1/2 minutes. Have your pressure set so that it is medium, but be careful, too much pressure can crack or break the mug.
Full wrap tutorial available on my YouTube channel - https://www.youtube.com/watch?v=2ZGcsuagE8E&t=6s&ab_channel=ReginaLynnDesignHomeEdition