These sturdy Cherry edged MDF plaques with gloss white finish feature a cove edge and keyholes for wall display. These do come blank with a plastic film to protect the surface. You will need to remove the plastic and with soft cloth wipe down the surface to remove any residue or stickiness left behind.
THESE DO COME BLANK and not with the design as pictured. This is a finished one that I have done and is the actual plaque made shown in the pictures :)
2 sizes available -
6" x 8" and 8" x 10"
5/8"" thickness (please be sure your press can open to this thickness)
Please Note **** When attaching your image to the plaque for pressing please DO NOT put your tape on the cherry finish as it can be pulled off when removing the tape. I recommend using a larger paper and taping to the back side of the plaque to avoid that from happening.
PRESSING INSTRUCTIONS and RECOMMENDATIONS - (these are only recommendations as each press is different. You will need to see what will work best for your particular press or machine)
Press for 385 degrees for 60 to 80 seconds with light to medium pressure. You will need to have a Nomex felt pad or soft paper towels underneath for cushioning and helps even your pressure.
****If the final image appears light increase the pressure or dwell time slightly (10-20 seconds). If it appears blurred or yellowed reduce the dwell time slightly (10-20 seconds).